HiTES4設定アプリ

It is an application for receiver setting operation of the tire pressure monitoring system (TPMS) HiTES4 (Hites) for trucks and buses in Japan.Introduction of HiTESHiTES is a system that monitors the tire air pressure and the tire air temperature, which are essential for maximizing the performance of truck and bus tires. It consists of a receiver, a repeater, an indicator, and a sensor. The data detected by the sensor attached to the wheel of the tire is sent from the indicator of the drivers seat through the repeater and the receiver, and the color of the LED (red or yellow). ) Will inform you of the abnormality. If you use the display app for smartphones/tablets, you can check the tire pressure and the air temperature inside the tire in real time, and you can greatly reduce the air pressure check before operation. Unlike the conventional inspection method by people, accurate data can be obtained. It is possible to understand and automate the recording.HiTES4 is a tire operation information database operated by YOKOHAMA T. M. It can be linked with S (tire management system). HiTES4 and T.S. M. By linking S, you can check the tire pressure and air temperature inside the tire through the Internet. For product inquiries, please contact your Yokohama tire dealer.Recommended for people like this・I want to reduce the risk by puncturing, reducing air pressure, etc., early when using a single tire such as a super flat tire・I want to detect the abnormal temperature in the tire early, which is the cause of the vehicle fire due to the tire dragging, and reduce the risk・I want to prevent fuel consumption deterioration by accurate tire pressure management and reduce costs and environmental load by suppressing abnormal tire wear.・I want to know the vehicle tire pressure management status and vehicle position information at the office *Functions linked with TMS・When considering the use of retreaded tires, I would like to understand the companys use of tiresWhat you can do with the HiTES4 setting appThe following operations and displays can be performed on the HiTES4 receiver.・Initial setting after installing HiTES4 device on the vehicle (registration of vehicle and sensor information)・Setting of control values ​​(red and yellow) to notify abnormalities in air pressure and temperature· Sensor position reset operation after tire rotation・Trailer (vehicle equipped with HiTES4) connection/disconnection setting· Sensor reception status monitor・New sensor registration when replacing the sensor・T. M. S-link settings (Wi-Fi access point settings, etc.)*Not available with HiTES4 setting app alone. HiTES4 equipment is required.[HiTES4 product introduction page]https://www.y-yokohama.com/product/truckbustire/hites/[OS requirements]Android OS 8.0 or later【Terms of service】Please confirm the terms of use described in the instruction manual (operation) included with the HiTES4 device.By downloading this application to your smartphone or other information device, you are deemed to have agreed to the terms of use.*The electronic version of the instruction manual (operation) is posted on the HiTES4 product introduction page.【Contact Us】Yokohama Rubber Co., Ltd. Tire Customer Consultation Service https://www.y-yokohama.com/cp/inquiry/Privacy policy https://www.y-yokohama.com/privacy/